Tech

How to Connect an Xbox 360 Controller to a PC Easily

Written by Moosa

It wasn’t that long time ago. It was the case that connecting your Xbox 360 controller to a PC was either a hassle or required a lot of cables and wires to accomplish the task. However, the most recent technological advancements have helped make it much easier to connect your console to your computer via Bluetooth and other similar alternatives.

Connecting wireless Xbox 360 controller to pc without receiver is not an exclusion. The older models can also connect to your computer or laptop without difficulty. This is a quick impression of the steps to connect your Xbox 360 controller to your PC.

Joining the wireless controller to your PC.

This article is envisioned for people who own wireless controllers. If you have a wired Xbox 360 controller, skip straight to the section on installing software. If you have Wireless Xbox 360 controllers, joining your PC to the controller isn’t as straightforward as connecting to your console. To begin, you’ll need to purchase an appropriate receiver and follow the proper setup wizard.

If you don’t have your receiver typically costs between $10 and $20. The authentic Microsoft version is a bit more; however, various third-party options function flawlessly. After purchasing the wireless receiver, connect it to a suitable USB connector located on one side of the computer (see the image beneath for the figure). After plugging it into the receiver, a green light appears on the receiver to show that it’s functioning properly.

Install the program.

For your wireless game console and your remote wireless Xbox 360 controller to properly communicate with one another, users require downloading the software from Microsoft’s site or on the installation disc that comes with the controller otherwise you can get DS4Windows not detecting controller error too.

If you have the installation disc we mentioned earlier (probably not, but it’s possible), Connect it to the optical drive that is the heart of your PC and follow the instructions on the screen. It’s possible that you need to start your system again.

If it is not conceivable, install an Xbox 360 Wireless Controller for Windows relation. If you have strengthened it, choose Xbox 360 Controller for Windows in its place. Choose the version available for Microsoft Windows; you’re using Windows 7 and Windows 7; there are drivers for Windows 7.

The Windows 7 drivers will work with Windows 8 and Windows 10Select the language you’re using on your system, then select to download. The screen for downloading seems to hit Run and let run the Xbox 360 Fittings Setup program to install the wanted documents. Additionally, you may need to restart your computer after completing the installation.

Synchronizing the controller.

If you are using wired controllers; connect your controller with your PC. The controller is now set to go. Check your controller until you test it to verify that everything is functioning properly. If it is not working, you’ll need to attach it to your Wireless Xbox 360 controller with the receiver that’s connected to your computer.

For this, begin with the conclusion of the controller by persistent the Xbox Guide button in the middle of the controller and watching for the light to change color. The backlight will turn to. Then, click the connect button at the top of the receiver (figure B) until it begins to blink green. Next, press the button that is connected to the controller (figure C).

This pairing procedure is anticipated to take just several seconds. It returns to solid green, and every corner surrounding the controller’s Guide button should switch into a light (figure D). If you’re experiencing difficulties, you can contact Microsoft’s support page for more assistance.

The controller is being tested.

After the software is installed and the device has been connected or plugged in and tested, it’s time to confirm the connection. Introduction Start blackboard on your personal computer. Click the search option, and enter “game controllers.”

There will be a menu that asks you to connect USB gaming controllers. After that, you’ll be able to use those buttons to pull the triggers and then move the joysticks to confirm that the controller operates properly.

If it’s working, then you’ll see the relevant actions highlighted in the app. You don’t have to worry about which portion of the screen is lit. Since the system is acknowledging it, every button will be recognized. If the app doesn’t recognize the controller, it’s possible to fix the issue by visiting Xbox’s support site.

Play.

It’s all you have to achieve. A. The Xbox 360 controller is the most popular configuration for the most recent PC games. This means there is no need to make any particular keys or modifications to the settings of the vast majority of games.

Make sure that the controller is on to your computer when you begin the game and that it can be detected. In actuality, certain games can switch into the Xbox controller on their own, even during an event.

About the author

Moosa